500 Series Notcher

500 Series Notcher

Description: Machine is a punch and die style machine for through-wall notching of paper mill cores, one end at at time. The single station design is standard. The machine runs continuously. Many types of notchers are available. We have a two station single notcher, a notcher with double notching on upper station and single notching on lower station.

500 Series Notcher in PDF Format.

Berlin Foundry & Machine
Company
P.O. Box 127
Berlin, NH 03570-0127
Tel. 603-752-4550
Fax. 603-752-2798
Email info@berlinfoundry.com

500 Series Notcher

Capacity:

Method of Operation:

Motor:

Electrical:

Cycle:

Floor Space:

Shipping Weight:

Standard Equipment:

Core from 3in. I.D. to 6in. OD and up to 16in. OD with optional equipment. Notch size from 1/4in. to 2in. wide and 1 1/8in. deep. Other depths available - consult factory.

Place core over anvil and push and hold core against depth collar for one cycle then pull core off anvil, exchange ends and repeat.

3/4 H.P. , 1800 RPM, 56 frame.

Specify 230-460-575 voltage, 3 phase 60 Hertz (special electrical characteristics available on request).

Machines run continuously at approx. 45 RPM.

Approximately 18in. x 20.

Approximately 550 lbs.

Machine comes with 1 set of standard punch and die, 1 guard and reducer.