Berlin Foundry & Machine
Company
P.O. Box 127
Berlin, NH 03570-0127
Tel. 603-752-4550
Fax. 603-752-2798
Email info@berlinfoundry.com
Berlin Fully Automatic Core Saw
Power: Specify 230/460/575 volts/3 phase/60 Hertz
Air Required: 80 P.S.I. at 15 C.F.M
CAPACITY: 3in. ID to 6in. ID standard.
CUT LENGTH: 120in. maximum standard - can be modified to suit
PARENT CORE: 144in. long standard - can be modified to suit
|
Cutting Cycle:
Features:
Operation:
Processor:
Safety:
Optional:
|
Determined by lenght of core you are cutting, average production is expected to be 250 per hour.
Carbide tipped sawblade assuring square cuts. DUST FREE cores with end seal device and position of cut stop is automatically set by servo drive motor thus assuring that all cores are cut to + or - .002 of each other. All scrap is removed from machine by conveyor system.
Operator programs length of parent core, length of cores to be cut and number of cores to be cut, trim cut or no trim cut, all done using Allen Bradley Panel View 900. Operator programs length of parent core, length of cores to be cut and number of cores to be cut, trim cut or no trim cut, all done using Allen Bradley Panel View 900.
Parent cores are loaded into hopper by use of forklift truck, parent cores are then loaded onto saw by core feeder.
Parent core is then fed into saw and cut to whatever length has been entered by operator.
Cut cores can then be fed into other core prep equipment or accumulated on collection tables.
Allen Bradley SLC 5/04 on semi-automatic or automatic models and A-B PLC 5 can also be supplied as an extra option.
Opti-Touch cycle buttons. If in manual mode requires operator to maintain both hands in buttons while cutting. Clamping mechanism is totally covered as is the saw blade. em...
Infeed table (not required when hopper and feeder is purchased), digital length display or servo drive to set cut stop, trim cut, discharge table or an automatic core loading system...
|
