|
Machine is used to cut 30 degree bevel on end of core to fit bevel type caps.
Specify 230/460/575 volts/3 phase/60 hertz.
80 P.S.I.
3 HP, 1800 RPM, 182T frame, TEFC
3/8in., 1/2in. and .660 wall cores.
Replaceable carbide inserts.
Select core to be beveled and place in trough and slide it forward until it comes up solid against the core stop. Immediately the electric eye will see the core in position and signal the clamp segment to clamp down on core. Dolly will then advance core to the beveling head where core will be beveled. Dolly will come in contact with "depth of cut" L.S. #2 retracting dolly, once dolly has retracted, L.S. #1 will open core clamp. Operator will then remove core from machine.
|
