|
Specify 230/460/575 volts/3 phase/60 hertz.
2 ea. 1 1/2 HP, 1800 RPM, 145T frame, TEFC
3in. I.D. cores: 3/8in., 1/2in. and .660 wall cores.
8in. Diameter Carbide tipped dado blades standard but 9� Diameter Available.
1/2in. wide up to 1 7/8in. wide.
1 1/8in. deep standard and up to 1 7/8in. deep using 9in. Diameter Blades.
Two station machine for notching 2 different sizes with no cutter changes, automatic length setting, 180 degree indexing device for making a double notch in-line on both ends of core, core escapement for feeding core to machine and a core transfer when used in an automatic capping line to feed notched core to next station and automatic length setting.
Clean-cut notches with NO damage to core, vacuum duct connection at cut point, adjustable dolly rides on Thompson bearings, sold as a stand-alone machine and also with capping equipment.
Double Head Dado Notcher in PDF Format.
|
